BMP-3 with ERA-attachment brackets sighted at the May 9th Parade rehearsal

-

Newly fitted BMP-3s with ERA-mounting brackets have appeared at the rehearsal in Moscow in preparation for the 9th of May parade. It is worth noting that these vehicles have been sighted last year in June-July-August at the "Kurganmashzavod", and are utilizing a similar ERA-bracket layout as the BMP-3M with ERA that was shown in the early 2000s. 



 Sadly there are no images of these new BMP-3s utilizing ERA. Maybe as time goes on, NII Stali and Kurganmashzavod will reveal it.  


Taken from: Kein Mensch Kein Tier Twitter

----------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------


Comments

Post a Comment

Popular posts from this blog

"AGAVA" - "AGAVA-2" and its confusing history

-
Image
When covering Soviet sight technology there are always some interesting designs and approaches to solving an issue. It is a common fact that the Soviet Union in the 1980s-1990s was quite behind in thermal sight technology. Only in the 1990s, but to be specific in 1992, the Soviet Union now Russia started to field small batches of thermal sights on their tanks, those primarily being T-80Us and some of the early T-90 variants, which just recently at that time entered service. Russia's journey through creating its own domestic thermal sight traces back to 1982.  The 1980s were quite an important time for the 'Krasnogorsk Factory named after S.A Zverev', which is still to date an Optical Engineering and Optoelectronics factory. The factory is primarily known for making domestic Soviet cameras back in the day. However, that's not the only thing that the factory has produced back then.  Close to the mid-1980s, the facility was contracted to develop new thermal sight technolog
Read more

T-80 rubber flaps

-
Image
Over half a year ago, I promised to write an article about T-80 rubber flaps and their purpose, which would have completed the trifecta article collection: T-80 aerodynamic features and  T-80 MBT engine air filtration and dust prevention systems . This article builds up on the T-80 aerodynamic features topic and will conclude this series.  Unfortunately, I have come across zero primary sources, that directly mention the purpose of these rubber flaps, which makes it difficult to write an article with primary sources. There are 2 disputed arguments on this topic; one argument states that the flaps on the T-80s are meant to redirect airflow and reduce air contaminants like sand and dust from entering the engine. The other argument is that these flaps are used as additional protection to prematurely detonate HEAT warheads. I will discuss this topic by only talking about the presence of the flaps on T-80s. Firstly the rubber skirt, present on the lower frontal plate of T-80s. Its primary f
Read more

BMP-3 ERA topic continuation

-
Image
This post expands on a previously covered topic, being the BMP-3 with ERA . Potentially sealing this topic until later when more information comes to light.  ERA package components:  ERA containers filled with 4S24 ERA elements, containers are mounted on the front and both sides of the hull. Slat armour mounted on the rear of the vehicle protects the engine compartment. Overall package performance:  Protection against AT rocket-propelled grenades (RPG) PG-7V, PG-7VS, PG-7VL, PG-7VM, PG-9S and other types of grenades capable of penetrating up to 600mm RHA within a 180 ° fire arc.  In areas covered by ERA containers, the probability of protection is at least 80%.  In areas covered by slat armour, the probability of protection is at least 50%. Protection against small arms:  Areas covered by ERA containers 12.7mm B-32 rounds at 0m within 180 ° fire arc 14.5mm B-32 rounds at 50 m within 180 ° fire arc Areas covered by slat armour and steel plates 12.7mm B-32 rounds at 35 0m within 180 ° fi
Read more