"Nakidka" thermal masking tarp

-

Nona equipped with "Nakidka"

"Nakidka" was shown for the first time during the "Ural Arms Expo-2000". 


"Nakidka" consists of a special synthetic thermal insulation material, the temperature of the outer surface corresponds to the temperature of the surrounding air. The use of the "Nakida" allows you to reduce the probability of detecting a tank by infrared homing heads by 2-3 times. In all radar ranges, the visibility of the combat vehicle is reduced by up to 10 times. When observing a vehicle that is equipped with the "Nakidka" through either a radio-thermal channel, the silhouette of the vehicle merges with the surrounding area. 
 

a) Tank sized object without "Nakidka" - b) Tank sized object with "Nakidka"


When observing a vehicle without the use of a thermal imaging system or radar-based system, the "Nakidka" package barely changes the visual appearance of the vehicle. 


Vehicles observed through thermal imaging channel 
Tank sized object without "Nakidka" on the left - Tank sized object with "Nakidka" on the right


T-90 equipped with "Nakidka"

T-72M1 equipped with "Nakidka"

 BTR equipped with "Nakidka"


References: NIIStali

Comments

Post a Comment

Popular posts from this blog

"AGAVA" - "AGAVA-2" and its confusing history

-
Image
When covering Soviet sight technology there are always some interesting designs and approaches to solving an issue. It is a common fact that the Soviet Union in the 1980s-1990s was quite behind in thermal sight technology. Only in the 1990s, but to be specific in 1992, the Soviet Union now Russia started to field small batches of thermal sights on their tanks, primarily T-80Us and some of the early T-90 variants, which just recently entered service. Russia's journey through creating its own domestic thermal sight traces back to 1982.  The 1980s were quite an important time for the 'Krasnogorsk Factory named after S.A Zverev', which is still to date an Optical Engineering and Optoelectronics factory. The factory is primarily known for making domestic Soviet cameras back in the day. However, that's not the only thing that the factory has produced back then.  Close to the mid-1980s, the facility was contracted to develop new thermal sight technology for the Soviet Ministry
Read more

GTD-1000 - GTD-1000TF - GTD-1250 Gas Turbine Engines

-
Image
The world's first mass-produced tank gas turbine engine GTD-1000T was created at the Klimov Plant in 1968 for the T-80 main battle tank developed By the special tank design Bureau of the Kirov plant (now JSC "Spetsmash"), which was adopted by the Soviet Army in 1976. Since 1980, a modification of the GTD‑1000TF for T-80B/BV tanks was produced, since 1986 a modification of the GTD-1250 for T-80U tanks.  GTD-1250 Engines of the GTD-1250 family as part of the power plants of T-80 tanks are in service with the armies of Russia, Belarus, Cyprus, South Korea, Kazakhstan. Turbine engine GTD-1000T/GTD-1250, which have a large volume-weight  capacity and a more favourable traction characteristic compared to diesel engines, provide T-80 tanks with interesting characteristics: - higher operational readiness - easy start-up at low temperatures (up to -40°C) - better cross-country ability on soils with a low load-bearing capacity - best noise and heat-masking qualities - increased &qu
Read more

T-80 aerodynamic features - Part 1

-
Image
This article is the first part of a set of articles covering the engineering and methodology used to create the T-80s filtration system alongside aerodynamics to reduce airflow dust/sand contamination.  The T-80 MBT has been fielded in many climate regions. Desert climates pose a variety of variables that directly impact dust presence in the engine air filtration system. Variables include wind speed and direction,  vehicle speed,  depth and soil composition, air intake system design, and contours of the hull and turret.    Historical background:  Long-term trials were conducted in the southern Kara-Kum desert. It was determined that during  1970-1983, the quantity of dust present in the engine filtration system increased due to climate changes and weaker upper soil layers.   During the 1970s to 1980s, the Turkmen Canal underwent Soviet industrialization to build an irrigation canal and other facilities. This build-up of new infrastructure directly affected wind speeds in the ar
Read more