"Omsktransmash" plan to modernize TOS-1A 'Solntsepyok' in the future

-



Denis Petrov, Chief Engineer of the Omsktransmash joint-stock company, said that to date, work is underway in the Russian Federation to increase the area of damage, the firing range and the accuracy of the 'Solntsepyok' system. 

"At the moment, work is underway to increase the firing range, accuracy, and simplify the process of target acquisition and mission completion. And first of all to improve on the area of damage." - Denis Petrov

Taken from: TV Zvezda

--------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------

Comments

Post a Comment

Popular posts from this blog

Modelling AFV detection parameters using thermal imaging reconnaissance

-
Image
In the 1980s, the Soviet Union determined that the widespread use of thermal imaging devices for reconnaissance majorly outperformed the maximum detection ranges of devices based on electro-optical image converters. It was rated that these new thermal imaging systems had ranges of 3km compared to electro-optical image converters with ranges of 1,5k-2km. To mask AFVs from thermal reconnaissance means, it was determined to create algorithms that would compute a thermal imaging result based on variables like thermal emission and background (ambient temperature). The simulated detection process went as follows; search for targets in a specific area, find a target with higher display contrast than the surrounding area and identify the target through a poorly detailed silhouette.  To avoid complexity, the article will not cover the entire computing algorithm.  Algorithm used to form thermal imaging result Thermal imaging result based on the computed algorithm  It is stated that the distance
Read more

GTD-1000 - GTD-1000TF - GTD-1250 Gas Turbine Engines

-
Image
The world's first mass-produced tank gas turbine engine GTD-1000T was created at the Klimov Plant in 1968 for the T-80 main battle tank developed By the special tank design Bureau of the Kirov plant (now JSC "Spetsmash"), which was adopted by the Soviet Army in 1976. Since 1980, a modification of the GTD‑1000TF for T-80B/BV tanks was produced, since 1986 a modification of the GTD-1250 for T-80U tanks.  GTD-1250 Engines of the GTD-1250 family as part of the power plants of T-80 tanks are in service with the armies of Russia, Belarus, Cyprus, South Korea, Kazakhstan. Turbine engine GTD-1000T/GTD-1250, which have a large volume-weight  capacity and a more favourable traction characteristic compared to diesel engines, provide T-80 tanks with interesting characteristics: - higher operational readiness - easy start-up at low temperatures (up to -40°C) - better cross-country ability on soils with a low load-bearing capacity - best noise and heat-masking qualities - increased &qu
Read more

"AGAVA" - "AGAVA-2" and its confusing history

-
Image
When covering Soviet sight technology there are always some interesting designs and approaches to solving an issue. It is a common fact that the Soviet Union in the 1980s-1990s was quite behind in thermal sight technology. Only in the 1990s, but to be specific in 1992, the Soviet Union now Russia started to field small batches of thermal sights on their tanks, those primarily being T-80Us and some of the early T-90 variants, which just recently at that time entered service. Russia's journey through creating its own domestic thermal sight traces back to 1982.  The 1980s were quite an important time for the 'Krasnogorsk Factory named after S.A Zverev', which is still to date an Optical Engineering and Optoelectronics factory. The factory is primarily known for making domestic Soviet cameras back in the day. However, that's not the only thing that the factory has produced back then.  Close to the mid-1980s, the facility was contracted to develop new thermal sight technolog
Read more