T-72B3 Arena-M continuation

-

 Previous article: T-72B3 Obr.2016 equipped with Arena-M APS 

The article above contains previously covered footage about the T-72B3 with Arena-M, while this article continues this current Arena-M topic. 

Today TV Zvezda premiered another episode of their weekly "Military Acceptance" show,  where they present different military equipment. 

In today's episode, TV Zvezda released more footage about the T-72B3 Obr.2016 with Arena-M APS.


T-72B3 Obr.2016 with Arena-M equipped with Nakidka thermal masking tarp. 




T-72B3 Obr.2016 with Arena-M APS mounting.



Commanders position. 

Arena-M launch shafts and countermeasures. 



The T-72B3 in this video had to part-take in underwater tests. Mainly to see if the electronics and the APS can still function after being submerged underwater for 30 minutes. 


The countermeasure charge is marked as a mockup aka dummy charge and doesn't seem to be a real active one.

Arena-M computing block.


Writes note: They are progressively releasing more and more footage about this vehicle. This time they show closeups of the actual APS, presenting the vehicle in its full combat loadout, including Arena-M APS, Nakidka thermal tarp, side-mounted containers (presumably spare parts for the APS or carrying countermeasure chargers for the APS). 

Taken from: TV Zvezda

----------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------

Comments

Post a Comment

Popular posts from this blog

"AGAVA" - "AGAVA-2" and its confusing history

-
Image
When covering Soviet sight technology there are always some interesting designs and approaches to solving an issue. It is a common fact that the Soviet Union in the 1980s-1990s was quite behind in thermal sight technology. Only in the 1990s, but to be specific in 1992, the Soviet Union now Russia started to field small batches of thermal sights on their tanks, primarily T-80Us and some of the early T-90 variants, which just recently entered service. Russia's journey through creating its own domestic thermal sight traces back to 1982.  The 1980s were quite an important time for the 'Krasnogorsk Factory named after S.A Zverev', which is still to date an Optical Engineering and Optoelectronics factory. The factory is primarily known for making domestic Soviet cameras back in the day. However, that's not the only thing that the factory has produced back then.  Close to the mid-1980s, the facility was contracted to develop new thermal sight technology for the Soviet Ministry
Read more

GTD-1000 - GTD-1000TF - GTD-1250 Gas Turbine Engines

-
Image
The world's first mass-produced tank gas turbine engine GTD-1000T was created at the Klimov Plant in 1968 for the T-80 main battle tank developed By the special tank design Bureau of the Kirov plant (now JSC "Spetsmash"), which was adopted by the Soviet Army in 1976. Since 1980, a modification of the GTD‑1000TF for T-80B/BV tanks was produced, since 1986 a modification of the GTD-1250 for T-80U tanks.  GTD-1250 Engines of the GTD-1250 family as part of the power plants of T-80 tanks are in service with the armies of Russia, Belarus, Cyprus, South Korea, Kazakhstan. Turbine engine GTD-1000T/GTD-1250, which have a large volume-weight  capacity and a more favourable traction characteristic compared to diesel engines, provide T-80 tanks with interesting characteristics: - higher operational readiness - easy start-up at low temperatures (up to -40°C) - better cross-country ability on soils with a low load-bearing capacity - best noise and heat-masking qualities - increased &qu
Read more

Object 490 "Тополь" - "Poplar"

-
Image
      The project of a promising tank developed in the 1980s by E.A. Morozov. Object 490 "Тополь" - "Poplar" mockup                          The design had some primary characteristics which are worth mentioning. A crew consisting of two people - the gunner commander and the driver.  Reducing the crew to two and placing them in a compact, well-protected capsule.  The use of a hydropneumatic suspension.  In addition to solving the main task - increasing average speeds by improving the smoothness characteristic, it makes it possible to control the tank's clearance, which increases the manoeuvrability and survivability in battle.  In addition, the controlled hydropneumatic suspension by changing the trim of the machine allows you to increase the gun pointing angles in the vertical plane. Reducing the crew to two people and placing them in a compact, well-protected capsule with the automation of the functions performed by tankers.  The principled ability to control
Read more