T-72B3 tanks equipped with self-made housing covers

-

T-72B3 tanks equipped with self-made drives for opening the cover of the multi-channel thermal imaging sight "Sosna-U". Apparently, the sight cover rotates on the lower bolt, the rod is attached to the cover with one end, the other to the drive of the brush of the sight-rangefinder 1A40, allowing the gunner to open the housing cover from the inside of the tank without exposing himself outside. 



Taken from: VK-Milinfo

Comments

Post a Comment

Popular posts from this blog

"AGAVA" - "AGAVA-2" and its confusing history

-
Image
When covering Soviet sight technology there are always some interesting designs and approaches to solving an issue. It is a common fact that the Soviet Union in the 1980s-1990s was quite behind in thermal sight technology. Only in the 1990s, but to be specific in 1992, the Soviet Union now Russia started to field small batches of thermal sights on their tanks, primarily T-80Us and some of the early T-90 variants, which just recently entered service. Russia's journey through creating its own domestic thermal sight traces back to 1982.  The 1980s were quite an important time for the 'Krasnogorsk Factory named after S.A Zverev', which is still to date an Optical Engineering and Optoelectronics factory. The factory is primarily known for making domestic Soviet cameras back in the day. However, that's not the only thing that the factory has produced back then.  Close to the mid-1980s, the facility was contracted to develop new thermal sight technology for the Soviet Ministry...
Read more

T-80 rubber flaps - Part 3

-
Image
Over half a year ago, I promised to write an article about T-80 rubber flaps and their purpose, which would have completed the trifecta article collection: T-80 aerodynamic features and  T-80 MBT engine air filtration and dust prevention systems . This article builds up on the T-80 aerodynamic features topic and will conclude this series.  Unfortunately, I have come across zero primary sources, that directly mention the purpose of these rubber flaps, which makes it difficult to write an article with primary sources. There are 2 disputed arguments on this topic; one argument states that the flaps on the T-80s are meant to redirect airflow and reduce air contaminants like sand and dust from entering the engine. The other argument is that these flaps are used as additional protection to prematurely detonate HEAT warheads. I will discuss this topic by only talking about the presence of the flaps on T-80s. Firstly the rubber skirt, is present on the lower frontal plate of T-80s. I...
Read more

New T-72B-"3M" analysis

-
Image
New footage shows a new T-72B3 "M" vehicle fielding non-standard equipment. The vehicle features all the new integrations that were fielded by UVZ in the last several months. T-90M style front mudguards, additional ERA protection around the gun mantlet and commanders cupola, steel tubes used for mounting additional protection against loitering munitions and RPGs. Posts covering these changes:  T-72B3M and T-90M changes , New T-72B3M modernization batch .  The vehicle received additional ERA protection on the lower frontal plate and new ERA containers mounted along the entire side of the tank.   Additionally, the vehicle is missing several standardized features that would be seen on other T-72B3M tanks.  The standard Sosna-U multi-channel thermal sight has been replaced by the 1PN-96MT-02. This sight differs from the Sosna-U by not having its own laser rangefinder channel. Instead, the sight receives data from the main FCS block to perform ballistic calculat...
Read more