The tank division of the Central Military District will receive updated BMP-2, "Shturm-S" and "Sobolyatniki-O"

-




In 2021, more than 20 units of modern weapons and special military equipment will be received by units of the Guards Tank Division of the Central Military District, stationed in the Chelyabinsk and Sverdlovsk regions.

According to the press service of the Central Military District, deliveries will be completed by the end of the year.

In 2021, a batch of 10 modernized BMP-2M infantry fighting vehicles will enter service with the motorized rifle units of the largest tank formation in the Central Military District. Unlike the models of earlier modifications, the BMP-2M has an automatic fire control system that allows the commander and gunner to act as a single unit in the daytime and at night.

The anti-tank divisions of the division will be armed with more than 10 Shturm-S self-propelled combat vehicles capable of destroying armoured vehicles, including those equipped with dynamic protection, as well as air targets and structures in all weather conditions.

This year, the armament fleet of the armoured reconnaissance units will be supplemented by the Sobolyatnik-O detection systems designed to monitor the situation at a distance of up to 30 kilometres, which allows analyzing target parameters with an accuracy of 10 meters and classifying them, dividing them into people and equipment.

The Guards Vitebsk-Novgorod twice Red Banner tank division of the Central Military District was formed on December 1, 2016. It includes 3 tank, motorized rifle and self-propelled artillery regiments, an anti-aircraft missile battalion, a reconnaissance and engineer battalion, units and subunits of combat, logistical and technical support.


Taken from: Vestnik

Comments

Post a Comment

Popular posts from this blog

"AGAVA" - "AGAVA-2" and its confusing history

-
Image
When covering Soviet sight technology there are always some interesting designs and approaches to solving an issue. It is a common fact that the Soviet Union in the 1980s-1990s was quite behind in thermal sight technology. Only in the 1990s, but to be specific in 1992, the Soviet Union now Russia started to field small batches of thermal sights on their tanks, primarily T-80Us and some of the early T-90 variants, which just recently entered service. Russia's journey through creating its own domestic thermal sight traces back to 1982.  The 1980s were quite an important time for the 'Krasnogorsk Factory named after S.A Zverev', which is still to date an Optical Engineering and Optoelectronics factory. The factory is primarily known for making domestic Soviet cameras back in the day. However, that's not the only thing that the factory has produced back then.  Close to the mid-1980s, the facility was contracted to develop new thermal sight technology for the Soviet Ministry...
Read more

T-90A - a short history of sights

-
Image
  In 2004, the T-90A (Object 188A1) tank joined the Russian armed forces. It included many fire control system upgrades, a new welded turret, and improved mobility. The T-90A Obr. 2004 tank was fitted with a T01-K05 Buran-M Obr. 2004 3rd generation night vision sight, which improved over the previous T01-K01 Buran-PA sight from the T-90 Obr. 1992. --Picture of T-90A with Buran-M Obr. 2004-- In 2005, the tank received an upgrade for the sight, which became T01-K05 Buran-M Obr. 2005, with noticeable differences in the sight's housing. --Picture of T-90A with Buran-M Obr. 2005-- --Picture of T-90A diagram with Buran-M Obr. 2005-- --Picture of two T-90As, one with Obr. 2004 and one with Obr. 2005 Buran-M sights-- Above: T-90A with Buran-M Obr. 2004 sight, and behind it, T-90A with Buran-M Obr. 2005 sight. In 2006, the T-90A had to be brought to more modern standards, so the production of this model with new second-generation thermal imaging sight began. The sight was named ESSA, wh...
Read more

Object 490 "Тополь" - "Poplar"

-
Image
      The project of a promising tank developed in the 1980s by E.A. Morozov. Object 490 "Тополь" - "Poplar" mockup                          The design had some primary characteristics which are worth mentioning. A crew consisting of two people - the gunner commander and the driver.  Reducing the crew to two and placing them in a compact, well-protected capsule.  The use of a hydropneumatic suspension.  In addition to solving the main task - increasing average speeds by improving the smoothness characteristic, it makes it possible to control the tank's clearance, which increases the manoeuvrability and survivability in battle.  In addition, the controlled hydropneumatic suspension by changing the trim of the machine allows you to increase the gun pointing angles in the vertical plane. Reducing the crew to two people and placing them in a compact, well-protected capsule with the ...
Read more