Tracked version of the new armored reconnaissance vehicle will be shown at the parade in Tula

-
 At the rehearsal of the military parade in Tula, along with the already known samples, new military equipment was presented. For example, a tracked version of the mobile point of reconnaissance and target designation for the PRP-5 rocket and artillery systems.


If the modification shown earlier is made on the basis of the BTR-82 armored personnel carrier, then this version is on the chassis of the well-proven long-term service in the BMP-3 troops.
This infantry fighting vehicle is currently used not only in the land forces of the Russian Army, but also enters the Marine Corps of the Russian Navy.


The armored scout is equipped with the latest equipment, including a radar station. Work has been carried out to strengthen the weapons - 7.62-mm machine guns were used on the samples of previous generations, and now the older 7.62mm samples have been replaced with new 12.7mm heavy machine gun systems. 

The upgraded BMD-2M will also take part in the celebrations for the first time. Installed on them, the "Берег" - "Shore" combat compartment received an all-day fire control system with a new sight, stabilizer, and automatic target tracking.


The armament is reinforced with the Kornet anti-tank complex, whose guided missiles can have various combat units, including tandem ones capable of destroying well-protected armored vehicles, and thermobaric ones for fighting low-flying air targets at a range of up to 10,000 meters.

Comments

Post a Comment

Popular posts from this blog

"AGAVA" - "AGAVA-2" and its confusing history

-
Image
When covering Soviet sight technology there are always some interesting designs and approaches to solving an issue. It is a common fact that the Soviet Union in the 1980s-1990s was quite behind in thermal sight technology. Only in the 1990s, but to be specific in 1992, the Soviet Union now Russia started to field small batches of thermal sights on their tanks, primarily T-80Us and some of the early T-90 variants, which just recently entered service. Russia's journey through creating its own domestic thermal sight traces back to 1982.  The 1980s were quite an important time for the 'Krasnogorsk Factory named after S.A Zverev', which is still to date an Optical Engineering and Optoelectronics factory. The factory is primarily known for making domestic Soviet cameras back in the day. However, that's not the only thing that the factory has produced back then.  Close to the mid-1980s, the facility was contracted to develop new thermal sight technology for the Soviet Ministry...
Read more

T-90A - a short history of sights

-
Image
  In 2004, the T-90A (Object 188A1) tank joined the Russian armed forces. It included many fire control system upgrades, a new welded turret, and improved mobility. The T-90A Obr. 2004 tank was fitted with a T01-K05 Buran-M Obr. 2004 3rd generation night vision sight, which improved over the previous T01-K01 Buran-PA sight from the T-90 Obr. 1992. --Picture of T-90A with Buran-M Obr. 2004-- In 2005, the tank received an upgrade for the sight, which became T01-K05 Buran-M Obr. 2005, with noticeable differences in the sight's housing. --Picture of T-90A with Buran-M Obr. 2005-- --Picture of T-90A diagram with Buran-M Obr. 2005-- --Picture of two T-90As, one with Obr. 2004 and one with Obr. 2005 Buran-M sights-- Above: T-90A with Buran-M Obr. 2004 sight, and behind it, T-90A with Buran-M Obr. 2005 sight. In 2006, the T-90A had to be brought to more modern standards, so the production of this model with new second-generation thermal imaging sight began. The sight was named ESSA, wh...
Read more

Object 490 "Тополь" - "Poplar"

-
Image
      The project of a promising tank developed in the 1980s by E.A. Morozov. Object 490 "Тополь" - "Poplar" mockup                          The design had some primary characteristics which are worth mentioning. A crew consisting of two people - the gunner commander and the driver.  Reducing the crew to two and placing them in a compact, well-protected capsule.  The use of a hydropneumatic suspension.  In addition to solving the main task - increasing average speeds by improving the smoothness characteristic, it makes it possible to control the tank's clearance, which increases the manoeuvrability and survivability in battle.  In addition, the controlled hydropneumatic suspension by changing the trim of the machine allows you to increase the gun pointing angles in the vertical plane. Reducing the crew to two people and placing them in a compact, well-protected capsule with the ...
Read more